Kontaktperson
Arvid Svanberg
Forskare
Kontakta Arvid
-
Kurser för partner i Applikationscenter för additiv tillverkning
Här hittar du de kurser som endast är öppna för partnerföretagen i AM-center.
Kommande webbinarier
Applikationscenter för additiv tillverkning anordnar regelbundet webbinarieserier för dig som är partner i centret. Under 2025 arrangeras 8 webbinarietillfällen som du kan läsa mer om nedan. Om du har frågor, eller är intresserad av att medverka, vänligen kontakta Arvid Svanberg.
5/2 2025: AI/ML aspects of DfAM
This webinar will cover how AI/ML can be used to generate designs suitable for AM and advance component design for AM. Target audience: design / application engineer.
19/2 2025: Process simulation (PBF-LB)
This webinar will cover practical considerations and the setup of process simulation in PBF at a macro-scale component level. Target audience: simulation / application engineer.
25/3 2025: Process development (PBF-LB)
This webinar will provide an overview of workflows and approaches for developing process parameters in PBF. Target audience: application engineer.
2/4 2025: Process development (DED)
This webinar will provide an overview of workflows and approaches for developing process parameters in DED. Target audience: application engineer.
30/4 2025: AM business models
This webinar will cover AM business models and key supply chain considerations. Target audience: business development / supply chain / purchasing.
28/5 2025: Introduction to AM, purchasing
This webinar will introduce purchasing considerations in AM. Target audience: business development / supply chain / purchasing.
3/9 2025: Printing preparation (PBF-LB)
This webinar will cover various aspects of the digital workflow involved in preparing for printing in the PBF process. Target audience: application engineer / operator.
17/9 2025: LCA for AM
This webinar will explore how to approach LCA for AM across various processes and materials. Target audience: business development / supply chain / purchasing.
Tidigare webbinarier
Missade du våra tidigare webbinarier? Om du är intresserad av att ta del av ett specifikt avsnitt, eller allihop, vänligen kontakta oss.
Introduction to metal additive manufacturing
Part 1 of the Metal Additive Manufacturing webinar series, which comprises five standalone episodes, each covering different facets of powder bed fusion processes, with a specific emphasis on laser as an energy source.
- General introduction to the main metal additive manufacturing methods with guidelines for process selection
- Possibilities, benefit, and drawbacks provided by metal additive manufacturing
- Available materials and part properties
Design for additive manufacturing
Part 2 of the Metal Additive Manufacturing webinar series, which comprises five standalone episodes, each covering different facets of powder bed fusion processes, with a specific emphasis on laser as an energy source.
- Introduction to AM design factors
- Considerations for support structures and part orientation
- Part consolidation – what is it and how does it add value?
- Holes, tubes, and hollow parts
- Adding markings and numbers for full traceability
Part and build preparation
Part 3 of the Metal Additive Manufacturing webinar series, which comprises five standalone episodes, each covering different facets of powder bed fusion processes, with a specific emphasis on laser as an energy source.
- An overview of the preparation steps
- File and part preparations
- Demonstration of the pre-build preparation (Magics)
Manufacturing and post-processing
Part 4 of the Metal Additive Manufacturing webinar series, which comprises five standalone episodes, each covering different facets of powder bed fusion processes, with a specific emphasis on laser as an energy source.
- Powder handling and powder recycling – an introduction
- A brief overview to post-processing
Design and process simulation with FEM
Part 5 of the Metal Additive Manufacturing webinar series, which comprises five standalone episodes, each covering different facets of powder bed fusion processes, with a specific emphasis on laser as an energy source.
- A topology optimization with manufacturing constrains
- Process simulation for metal AM
Introduction to Metal Binder Jetting: From Powder to Part
This webinar was held in May, 2024.
- Material Selection Strategies, Layer-by-Layer Fabrication, Debinding and Sintering Techniques
- Exploring the knowledge and practical applications of Metal Binder Jetting (MBJ)
- Design freedom, material compatibility, and efficiency gains.
- Advantages compared with traditional manufacturing methods.
- Showcasing real case studies and insights from a year of practical implementation
Sustainability aspects for additive manufacturing
This webinar was held in August, 2024.
- What is sustainability for your companies and how does it connect to product development and Additive Manufacturing?
- Sustainability in the value chain.
- Additive Manufacturing in circular economy.
- Sustainability in communication and Green Washing.
Introduction to Directed Energy Deposition
This webinar was held in August, 2024.
- Background, Directed Energy Deposition: technology, terminology and applications
- Technical presentation on the AMC MODULO400 DED system from AddUp/BeAM
- Guidelines for material, product and production development through detailed strategies
- Exploring practical applications of the Directed Energy Deposition technology
- Insights on improving Quality Assurance for improved productivity and robustness toward industrialisation
- Foreseeing new potential and industrial applications (composites and functionally graded materials)
Introduction to Hirtisation and HIP
This webinar was held in September, 2024.
⦁ Post-Processing in AM
⦁ Hirtisation Process in Post-processing
⦁ Materials suitable for Hirtisation
⦁ Process Development and Integration in AM workflow
⦁ Examples and Results
⦁ What is HIP and why is HIP important
⦁ How HIP works
⦁ Real Case Studies
